The whole machine can be divided into three parts:
1. Frame part: All the working bodies of the machine are installed and fixed on the frame. The frame of the machine is welded with high-quality carbon steel plates and channel steel, and has passed strict product qualification certification and specific process requirements. To achieve the purpose for which the machine is used;
2. Transmission connection part: The machine adopts cycloidal pinwheel reducer to drive the main shaft to rotate, and the main working part of the machine adopts nylon pins, which are the teeth of the transmission connector and the transmission drive, which is convenient for assembly and maintenance;
3. The stirring part: it is transmitted to the main shaft by the transmission wheel through the pin coupling. The material is evenly turned in the mixing chamber, so that the material can be fully mixed, thereby greatly reducing the residual amount of the material.
working principle
The work of the vertical mixer is that the rapid rotation of the screw lifts the raw materials from the bottom of the barrel to the top, and then scatters them in an umbrella shape and returns to the bottom. The raw materials are evenly mixed.
Job Features
Automatic running timing, motor ground load protection, feeding limit alarm (optional).
The materials of the parts in contact with China Hand Blenders Suppliers the equipment and raw materials are made of stainless steel, which is easy to clean and not easy to rust.
Jinchangtai adopts built-in or separate installation, so that the raw material or powder is separated from the bearing, it is not easy to be stuck, and the service life of the bearing is greatly extended.

Hand Blender detachable sus blade JK1192