How meat grinders prevent rust The meat grinder is a granular meat stuffing that meat processing enterprises process raw meat according to different technological requirements in the production process. and other meat products. Made of stainless steel, it is non-polluting to processed materials and meets food hygiene standards. The tool is specially heat-treated, with excellent wear resistance and long service life.
The meat grinder is simple to operate, easy to disassemble and assemble, easy to clean, and has a wide range of processed products. The tool can be adjusted or replaced at will according to the actual use requirements. After assembling or replacing the reamer, the tightening nut must be tightened to ensure that the grid does not move, otherwise the relative movement between the movement of the grid and the rotation of the reamer will also cause the effect of refining the material. The reamer must be in close contact with the grid, otherwise it will affect the cutting efficiency. The screw feeder rotates in the machine wall. It is necessary to prevent the surface of the screw from colliding with the machine wall. If a slight collision occurs, the machine will be damaged immediately. However, their gap should not be too large, which will affect the feeding efficiency and extrusion force, and even cause the material to flow back from the gap, so the processing and installation requirements of these parts are relatively high.
Everyone knows that the meat grinder is convenient and quick to grind meat, but if the meat grinder is found to be rusted, the meat grinder is undoubtedly a waste of good materials, so how can we solve the problem of the rust of the meat grinder?
Generally, metal iron products are rusted, and the rust can be removed by physical methods. But if the surface of the iron product is not flat, it is more difficult to use physical methods. For the inside of the meat grinder is spiral, we can't use a simple method to grind off the rust. Here are a few simple methods for your reference:
1. Mix the fine sand and yellow mud properly, put it into the meat grinder for stirring, let the fine sand and yellow mud remove the rust in the meat grinder. But be careful not to install the blade, otherwise the blade will be damaged.
2. You can buy some rust-removing sprays in the store, and spray to remove the rust. But this method does not know whether the rust removal is poisonous or not, and whether it can be cleaned up.
3. There can be a meat grinder soaked in rice water. It needs to be soaked for several days with very thick rice.